TH Chain Bucket Elevator

Short Description:

TH Chain Bucket Elevator use the sprocket conveying and is also widely used in lifting coal, cement, gravel, sand, fertilizer, food and other material with small lump of no rub or small rub (material temperature under 250 °C),The max lifting height is 40m.

Model:TH160-TH630

Lifting capacity :15-300m3/h

High efficiency ,stable performance with longer lifetime .

Adopt packaged sprocket,spare parts is very less .

 

FOB Price: US $2000-60000/Set

Min.Order Quantity: 1Set

Supply Ability: 1000 Set per Month


Product Detail

Product Tags

TH Chain Bucket Elevator

TH Bucket elevator in the project

TH315x20meter bucket elevator used in the tile adhesive mortar manufacturing plant for lifting sand and cement .

Introduction :

The TH type Chain Bucket Elevator is a kind of vertical conveying equipment, widely used in conveying powder, granule and small lump of no rub or small rub (material temperature under 250 °C), such as coal, cement, gravel, sand, fertilizer, food, etc. The main performance and parameters meet JB3926-85 vertical bucket elevator; the round-link chain accords with MT36-80 mineral high strength round-link chain.

Features:

(1)High capacity, The capacity is 1 times higher than the TD bucket elevator in the same bucket width.

(2)Adopt packaged sprocket, consisted of wheel body, sprocket rim which are connected by high strength bolt. It is convenient to unscrew the bolt and change sprocket rim after the sprocket wheel wear to a certain degree, which can save material, reduce the maintenance costs.

(3)The heavy-duty lever tension device makes automatic tension be realized. Once installed, no need to adjust, and it can keep constant tension, ensure the normal operation and avoid the skid or take off the chain.

(4)Stable lifting height, reliable operation, low noise, easy maintenance.

(5)The drag part is high strength low alloy steel chain whose lifetime is long. After proper heat treatment, the steel chain has very high tensile strength and wears resistance.

Structure:

The TH type Chain Bucket Elevator consists of frame, drag part (conveyor chain), hopper, drive wheel (head wheel), feeding inlet (input inlet) and discharging outlet (output outlet). The materials get into the bottom of the elevator through chute, then scooped up by hoppers and elevated to the top along with the conveying chain. After get round the top wheel, the materials turn down into the discharging outlet, thereby conveyed to the required position. The whole process is accomplished inside the frame, preventing the dust floating.The drag part uses high strength high quality alloy steel chain. Sprocket wheel with the sprocket rim composite structure has long lifetime and easy to replacement. The lower part using the gravity automatic devices can keep constant tension force, avoid skid or take off the chain and get certain yield ability, effectively protect lower shaft parts and other parts when hoppers get stuck accidentally.  

Technical Parameter:

TH Chain Bucket Elevator Model

TH160

TH200

TH250

Hopper Type

ZH

SH

ZH

SH

ZH

SH

Capacity/(m³/h)

15.77

24.97

17.87

28.6

31.43

48.19

Hopper

Volume (L)

1.2

1.9

1.5

2.4

3.0

4.6

 

Interval (mm)

500

Chain

Round Steel Diameter*Pitch(mm)

14*50

 

Single Load(KN)

≥190

Hopper Running Speed/(m/s)

1.2

1.2

1.2

Drive Sprocket Rotation Speed(r/min)

69.71

63.22

44.11

Conveying largest size(mm)

20

25

30

Note: Above Chart is technical parameter table for TH 160, 200, 250 chain bucket elevator. The hopper volume is the water volume, 100% filled.

Link Chain Bucket Elevator Model

TH315

TH400

TH500

TH630

Hopper Type

ZH

SH

ZH

SH

ZH

SH

ZH

SH

Capacity/(m³/h)

35

59

58

93

81

130

145

210

Hopper

Volume (L)

3.75

6

5.9

9

9.3

15

15

24

Interval (mm)

512

688

Chain

Round Steel Diameter*Pitch(mm)

φ18*64

φ22*86

Single Load(KN)

≥320

≥480

Hopper Running Speed/(m/s)

44

37.6

39.7

35.8

Conveying largest size(mm)

35

40

50

60

Life Guarantee:

Our company’s bucket elevator could guarantee 3 years life time unless spare parts .For model chose ,

Pls don’t hesitate to contact us .

Comparison between TD type and TH type bucket elevator :

Type TD Belt Bucket Elevator TH Chain Bucket Elevator
Structural characteristics  rubber belt as traction member forged ring chain as traction member 
Unloading characteristics centrifugal or mixed unloading mixed or gravity unloading 
Lifting Material It is suitable for conveying powder and granular materials with loose density of less than 1.5t/m3, small non-polishing and semi-polishing materials .
Temperature  The temperature of the material to be transported shall not exceed 60 C. If the temperature of the material to be transported shall not exceed 200 C when the heat-resistant rubber belt is used. the temperature of the material to be transported shall not exceed 250 C.
Model TDl00、TD160、TD250、TD315,TD400、TD500、TD630 TH315、TH400、TH500、TH630(TH800)(TH1000)
Lifting Height About 4-40meter About 4.5-40meter
Lifting Volume 4—238m3/h 35—185m3/h

  • Previous:
  • Next:

  • Write your message here and send it to us